Abseil Inspection
Historically, the cost of providing access to an inspection or minor repair site formed a disproportionate portion of the total cost. Abseiling leaves few surfaces which cannot be accessed quickly and cheaply.
Learn More…
Bedding Mortar
Unlike screed, bedding mortar is covered by tiles whilst still in its fresh state, so cannot be tested in-situ for quality/strength. However, Sandberg can audit the mixing, compacting and laying process providing an independent check on workmanship.
Learn More…
Bridge Inspection
The full scope of Special Inspection testing for corrosion risk assessment by half-cell potential, cover, resistivity measurements and chloride analysis is undertaken by Sandberg.
Learn More…
Building Inspection
When buying or leasing property, prospective owners and tenants need to be confident that any future commitment to the property is not a potentially disastrous financial time bomb.
Learn More…
Cladding Inspection
Recent building designs achieve some stunning appearances using an ever-increasing variety of materials but coupled with such diversity comes the potential for problems.
Learn More…
Concrete Floors
Concrete floors can often be a source of problems both during construction and subsequently during service. Cracking, staining, poor abrasion resistance, chemical attack and other defects…
Learn More…
Ferroscan Surveys
Sandberg offers the Ferroscan FS 10, a portable detection, measuring and mapping system which provides an immediate liquid crystal image of the reinforcement within the scanned area.
Learn More…
Fire Damaged Concrete
The visual appearance of concrete after a fire can be quite shocking with extensive blackening often accompanied by spalling and cracking. Of more importance, though, is the depth and extent of the fire damage.
Learn More…
Glass Fibre Reinforced Concrete (GFRC) Inspection
Sandberg can assist with consultancy services relating to the procurement of Glass Fibre Reinforced Concrete (GFRC) and the subsequent inspection of the manufactured products.
Learn More…
HAC Concrete
Rapid strength development made HAC popular for precast concrete in the UK during the 1960s. Mineralogical ‘conversion’ however, sometimes caused catastrophic reductions in concrete strength…
Learn More…
NDT Weld Inspection
NDT is an integral part of the weld inspection process on both ferrous and non-ferrous structures/components as it ensures that welds are free from sub-surface and surface-breaking defects.
Learn More…
Paint Inspection
Through our UKAS-accredited laboratories, consultants, engineers and inspectors, Sandberg is able to provide a comprehensive service covering everything from Paint Inspection to Corrosion Surveys to Inspection and Testing of Galvanizing.
Learn More…
Precast Concrete Inspection
Sandberg’s team of experienced precast concrete Inspectors and Consultants are able to assist with all aspects of the manufacturing process for precast concrete units.
Learn More…
RAAC Identification Surveys and Testing
RAAC in a building is a cause for concern, requiring immediate attention. As a leading independent construction materials consultancy, Sandberg can provide guidance and carry out inspections for RAAC.
Learn More…
Woodwool
Woodwool was used during the 1960s to provide insulation and as a permanent shutter to in-situ concrete. Unfortunately, when used as a permanent shutter, inadequate compaction of the concrete could occur due to…
Learn More…