Steelwork

Fire damaged steelwork assessment
Heat from a fire may significantly damage and distort structural steel members and bolted connections within a building and also adversely change their mechanical properties. It is important that any steelwork ...
ISO 3834 describes the requirements for a factory control system aimed specifically at fabricators and compliance with it is a mandatory requirement in a number of standards. The Sandberg team includes ...
Metals form a key element in almost all structures and machines and when problems are encountered failures can occur which may be catastrophic, leading to injury or even death. Sandberg provide independent ...
Sandberg offer site sampling of metal structures and a wide range of laboratory testing in our comprehensively equipped UKAS accredited laboratory.  Our experienced site and laboratory staff can supply ...
Sandberg can provide the expertise to assist the Structural/Civil engineer or fabricator in development and interpretation of specifications usually based on BS 5400 pt6 and National Structural Steelwork ...
Sandberg Steelwork Department provides a fully integrated support service including consultancy, vendor assessment, audit / quality monitoring, inspection, testing and QA function. Additionally, the extensive ...
About
Corporate Profile
Organisation
Quality of Service
People
Neil Sandberg
Simon Clarke
David Ellis
Philip Tate
Tony Willmott
Richard Rogerson
Mike Eden
Julian French
Chris Morgan
Gavin Mayers
Gregory Moor
Jayne Fagan
Bob Easthope
Ian Hudson
Julie Dell
Simon Morris
Marion Ingle
Mariachiara Faliva
Roger Lucas
Tony Pitman
Daniel Kinnersley
Doug Hunt
Panos Sotiropoulos
Jim Carmichael
Yohann Guellil
Alexander Hollyman
William Newby
Steve Pringle
Richard Harris
Rom Gostomski
Latest News
Memberships and Associations
Contact us
Vacancies
Building Inspector
Facade Consultant/Engineer
Structural Engineer
Metallurgy - Laboratory technician
Metallurgy - Site technician
NDT/Welding Inspector
Materials
Laboratories
Building Stone
Building Stone
CE Marking Stone
Stone Testing
UKAS Stone Testing
Chemistry
Cement Testing
Chemical Testing
Chloride Testing
Efflorescence
Hardened Concrete Analysis
Infrared Spectroscopy
Lead in Paint
Mortar Testing
Rock Salt Testing
Screed Analysis
Water Testing
Construction Materials
Agglomerated stone
Aggregate Testing
Bricks, Blocks, Flags & Pavers
Concrete Testing
Fresh Concrete Testing
Hardened Concrete Testing
Masonry
Screed Testing
Terrazzo
Geomaterials
Concrete Petrography
Mundic Concrete
SEM and X-ray
Sulphate Attack
Metallurgy
Laboratory Services
Bolt Testing
Metallographic Analysis
Metals and Welding
On-site Material Identification
Scaffold Testing
Tensile Testing
UKAS Testing
Investigation & Inspection
Ground Penetrating Radar (GPR)
GPR Surveys
GPR Principles
Building Investigation
Chimney Flue Location
Concrete Imaging
Concrete Slab Surveys
Ferroscan or GPR
Inspection
Abseil Inspection
Bedding Mortar
Bridge Inspection
Building Inspection
Cladding Inspection
Concrete Floors
Ferroscan Surveys
Fire Damaged Concrete
GFRC Inspection
HAC Concrete
NDT Weld Inspection
Paint Inspection
Precast Concrete Inspection
Woodwool
Leak Detection
Leak and Defect Location
Waterproof Membranes
Load Testing
Buildings
Balcony and Barrier Testing
Car Park Barriers
Crowd Barriers
Cladding Systems
Foundations
Glass Panels
Specialist Testing
Datalogging
Slip Resistance
Thermography
Steelwork/Metallurgy
Steelwork Services
Site Sampling
Safe Working Loads
Steelwork Fire Damage
Consultancy
Building Envelope
Building Fire Safety Audits
Building Regulations
Condensation
Facades & Roofing
Our Track Record
Thermal Performance
Thermal Training
Thermography
U-Values and Bridging
Concrete
Alkali Aggregate Reactivity
Concrete Consultancy
Concrete Durability
Concrete Strength Assessment
Conservation
Ancient and Modern
Heritage
Historic Mortars
Expert Services
Expert Witness
Independent Advice
Geology/Geomaterials
Geomaterials Services
Coastal Engineering
Polymers
Polymer Consultancy
Odour Analysis
Polymers in Construction
Polymer Failure
Polymer Identification
Polymer Microscopy
Quality Assurance
Contract Administration
Materials and Workmanship
Specialist Services
Damage Assessment
Demolition and Refurbishment
Glass and Glazing
Steelwork
CE Marking
ISO 3834 Services
Metallurgical Failure
Steelwork Consultancy
Stone Consultancy
Building Stone (new projects)
Building Stone (existing structures)
Building Stone (suitability)
Sandberg Consultants