Sandberg carry out a wide range of bolt testing on many types of bolts.We offer bolt testing using two tensometers to cover a wide range of loads as well as different test parameters.
Fire damaged steelwork assessment
Heat from a fire may significantly damage and distort structural steel members and bolted connections within a building and also adversely change their mechanical properties. It is important that any steelwork ...
Sandberg offer a metallographic, macrographic and micrographic analysis and evaluation of metallic and non-metallic materials both on site and in our UKAS accredited laboratory.  ...
The Metallurgy Laboratory offers a full range of UKAS accredited mechanical and non-destructive testing along with specialist testing for new components and materials. Materials identification, coating ...
The Metallurgy Laboratory offers a full range of UKAS accredited mechanical and non-destructive testing along with specialist testing for new components and materials. Materials identification, coating ...
Metals form a key element in almost all structures and machines and when problems are encountered failures can occur which may be catastrophic, leading to injury or even death. Sandberg provide independent ...
Sandberg offer site sampling of metal structures and a wide range of laboratory testing in our comprehensively equipped UKAS accredited laboratory.  Our experienced site and laboratory staff can supply ...
Sandberg Steelwork Department provides a fully integrated support service including consultancy, vendor assessment, audit / quality monitoring, inspection, testing and QA function. Additionally, the extensive ...
Sandberg carry out a wide range of tensile tests on a variety of materials and components.  Testing ranges from removing specimens from sections of material to determine the mechanical properties to testing ...
Corporate Profile
Quality of Service
Neil Sandberg
Simon Clarke
David Ellis
Philip Tate
Tony Willmott
Richard Rogerson
Mike Eden
Julian French
Chris Morgan
Gavin Mayers
Gregory Moor
Jayne Fagan
Bob Easthope
Ian Hudson
Julie Dell
Simon Morris
Marion Ingle
Mariachiara Faliva
Doug Hunt
Panos Sotiropoulos
Roger Lucas
Tony Pitman
Daniel Kinnersley
Jim Carmichael
Andy Kitson
Yohann Guellil
Alexander Hollyman
Steve Pringle
Richard Harris
Rom Gostomski
Memberships and Associations
Contact us
Building Inspector
Facade Consultant/Engineer
Structural Engineer
Corrosion/Protective Surveyor
Building Stone
Building Stone
CE Marking Stone
Stone Testing
UKAS Stone Testing
Cement Testing
Chemical Testing
Chloride Testing
Hardened Concrete Analysis
Infrared Spectroscopy
Lead in Paint
Mortar Testing
Rock Salt Testing
Screed Analysis
Water Testing
Construction Materials
Agglomerated stone
Aggregate Testing
Bricks, Blocks, Flags & Pavers
Concrete Testing
Fresh Concrete Testing
Hardened Concrete Testing
Screed Testing
Concrete Petrography
Mundic Concrete
SEM and X-ray
Sulphate Attack
Laboratory Services
Bolt Testing
Metallographic Analysis
Metals and Welding
On-site Material Identification
Scaffold Testing
Tensile Testing
UKAS Testing
Investigation & Inspection
Ground Penetrating Radar (GPR)
Ground Radar
GPR Principles
Building Investigation
Chimney Flue Location
Concrete Imaging
Concrete Slab Surveys
Ferroscan or GPR
Abseil Inspection
Bedding Mortar
Bridge Inspection
Building Inspection
Cladding Inspection
Concrete Floors
Ferroscan Surveys
Fire Damaged Concrete
GFRC Inspection
HAC Concrete
NDT Weld Inspection
Paint Inspection
Precast Concrete Inspection
Leak Detection
Leak and Defect Location
Waterproof Membranes
Load Testing
Balcony and Barrier Testing
Bridge Structures
Car Park Barriers
Crowd Barriers
Cladding Systems
Glass Panels
Specialist Testing
EM Surveys
Slip Resistance
Steelwork Services
Site Sampling
Safe Working Loads
Steelwork Fire Damage
Building Envelope
Building Fire Safety Audits
Building Regulations
Facades & Roofing
Our Track Record
Thermal Performance
Thermal Training
U-Values and Bridging
Alkali Aggregate Reactivity
Concrete Consultancy
Concrete Durability
Concrete Strength Assessment
Ancient and Modern
Historic Mortars
Expert Services
Expert Witness
Independent Advice
Geomaterials Services
Coastal Engineering
Polymer Consultancy
Odour Analysis
Polymers in Construction
Polymer Failure
Polymer Identification
Polymer Microscopy
Quality Assurance
Contract Administration
Materials and Workmanship
Specialist Services
Damage Assessment
Demolition and Refurbishment
Glass and Glazing
CE Marking
ISO 3834 Services
Metallurgical Failure
Steelwork Consultancy
Stone Consultancy
Building Stone (new projects)
Building Stone (existing structures)
Building Stone (suitability)
Sandberg Consultants