Yohann Guellil, Associate

CEng MEng MWeldI

Yohann Guellil
Department:   Steelwork Inspection/Welding Consultancy
Office:   Various
Email:   This email address is being protected from spambots. You need JavaScript enabled to view it.
Mobile:   07970 684042

Summary of Experience

  • Welding Engineering
  • Inspection and non-destructive testing
  • Welding / fabrication systems and certification
  • Protective treatment

Yohann is highly experience Chartered Engineer and member of The Welding Institute with a thorough academic grounding in materials and welding and a diverse post graduate experience. He has a deep knowledge of the standards and systems that are used in the wider civil engineering industry and seat on the BCSA’s Fabrication and Welding User’s Group.

Yohann joined Sandberg as a welding engineer in 2013 after leaving Rowecord Engineering where he had been a welding engineer for 5 years. During his time at Rowecord Yohann gained wide experience in structural steel fabrication having worked on a variety of bridges, blast furnaces and some of the most challenging structures on the London Olympic site. Yohann had previously gained diverse experience working for SMB SA in Ploufragan (Brittany), one of the major steelwork contractors in France and had also been involved with advanced welding processes such as laser welding of nickel superalloys for the automotive industry.

Yohann gained his Masters Degree in Material Sciences and Welding Engineering at the Ecole Polytechnique de l’Université de Nantes where he has also been a guest lecturer since 2010. Yohann is fluent in English, is a French native speaker and has a good proficiency in German.

Corporate Profile
Quality of Service
Neil Sandberg
Simon Clarke
David Ellis
Tony Willmott
Richard Rogerson
Mike Eden
Julian French
Chris Morgan
Gavin Mayers
Gregory Moor
Jayne Fagan
Bob Easthope
Ian Hudson
Julie Dell
Simon Morris
Marion Ingle
Mariachiara Faliva
Roger Lucas
Tony Pitman
Daniel Kinnersley
Doug Hunt
Panos Sotiropoulos
Jim Carmichael
Yohann Guellil
Ewan Maclean
Alexander Hollyman
William Newby
Steve Pringle
Rom Gostomski
Kevin Green
Simeon Tulip
John Gallagher
Latest News
Memberships and Associations
Contact us
Building Inspector
NDT/Welding Inspector
Building Inspector / Rope Access
Pension scheme documents
Building Stone
Building Stone
CE Marking Stone
Stone Testing
UKAS Stone Testing
Cement Testing
Chemical Testing
Chloride Testing
Hardened Concrete Analysis
Infrared Spectroscopy
Lead in Paint
Mortar Testing
Rock Salt Testing
Screed Analysis
Water Testing
Construction Materials
Agglomerated stone
Aggregate Testing
Bricks, Blocks, Flags & Pavers
Concrete Testing
Fresh Concrete Testing
Hardened Concrete Testing
Screed Testing
Concrete Petrography
Mundic Concrete
SEM and X-ray
Sulphate Attack
Laboratory Services
Bolt Testing
Metallographic Analysis
Metals and Welding
On-site Material Identification
Scaffold Testing
Tensile Testing
UKAS Testing
Investigation & Inspection
Ground Penetrating Radar (GPR)
GPR Surveys
GPR Principles
Building Investigation
Chimney Flue Location
Concrete Imaging
Concrete Slab Surveys
Ferroscan or GPR
Abseil Inspection
Bedding Mortar
Bridge Inspection
Building Inspection
Cladding Inspection
Concrete Floors
Ferroscan Surveys
Fire Damaged Concrete
GFRC Inspection
HAC Concrete
NDT Weld Inspection
Paint Inspection
Precast Concrete Inspection
Leak Detection
Leak and Defect Location
Waterproof Membranes
Load Testing
Balcony and Barrier Testing
Car Park Barriers
Crowd Barriers
Cladding Systems
Glass Panels
Specialist Testing
Slip Resistance
Steelwork Services
Site Sampling
Safe Working Loads
Steelwork Fire Damage
Building Envelope
Building Fire Safety Audits
Building Regulations
Facades & Roofing
Our Track Record
Thermal Performance
Thermal Training
U-Values and Bridging
Alkali Aggregate Reactivity
Concrete Consultancy
Concrete Durability
Concrete Strength Assessment
Ancient and Modern
Historic Mortars
Expert Services
Expert Witness
Independent Advice
Geomaterials Services
Coastal Engineering
Polymer Consultancy
Odour Analysis
Polymers in Construction
Polymer Failure
Polymer Identification
Polymer Microscopy
Quality Assurance
Contract Administration
Materials and Workmanship
Specialist Services
Damage Assessment
Demolition and Refurbishment
Glass and Glazing
CE Marking
ISO 3834 Services
Metallurgical Failure
Steelwork Consultancy
Stone Consultancy
Building Stone (new projects)
Building Stone (existing structures)
Building Stone (suitability)
Sandberg Consultants