Concrete floors

Floors are an important operational component of industrial buildings. However, concrete floors can often be a source of problems both during construction and subsequently during service. Cracking, staining, poor abrasion resistance, chemical attack and other defects have all been observed in recently constructed buildings.

Sandberg offers a comprehensive service for investigating existing problems with concrete floors and advises on preventing the occurrence of some of the more common flooring defects. Our multi-disciplinary teams of experienced engineers and technologists undertake site visits to examine flooring defects, supported by our extensive UKAS accredited testing facilities. Tests relevant to concrete floors include:-

  • Strength testing on Cores
  • Pull-off testing of Repairs and Coatings
  • Soundness Surveys/Non-Destructive Testing
  • Chemical Analysis (concrete composition, chloride and sulphate contents etc)
  • Petrographic Examination
  • Slip Resistance Testing
  • Failure Investigations

In the event of conciliation or litigation proceedings arising from defective performance of materials, Sandberg can provide consultation and expert assistance.

Our experience and independence together with our understanding of client needs and priorities enable us to offer an excellent value service to our clients.

Richard Rogerson

For further information contact: Richard Rogerson, Partner
Direct Tel: 020 7565 7080
Email: This email address is being protected from spambots. You need JavaScript enabled to view it.

About
Corporate Profile
Organisation
Quality of Service
People
Neil Sandberg
Steve Pringle
Simon Clarke
David Ellis
Philip Tate
Tony Willmott
Richard Rogerson
Mike Eden
Julian French
Chris Morgan
Gavin Mayers
Gregory Moor
Richard Harris
Jayne Fagan
Rom Gostomski
Bob Easthope
Ian Hudson
Julie Dell
Simon Morris
Marion Ingle
Mariachiara Faliva
Doug Hunt
Panos Sotiropoulos
Roger Lucas
Tony Pitman
Daniel Kinnersley
Michael Gould
Jim Carmichael
Andy Kitson
Yohann Guellil
Alexander Hollyman
Memberships and Associations
Contact us
Vacancies
Building Inspector
Structural Engineer
Materials
Laboratories
Building Stone
Building Stone
CE Marking Stone
Stone Tests
UKAS Stone Tests
Chemistry
Cement Testing
Chemical Testing
Chloride Testing
Efflorescence
Hardened Concrete Analysis
Infrared Spectroscopy
Lead in Paint
Mortar Testing
Rock Salt Testing
Screed Analysis
Water Testing
Construction Materials
Agglomerated stone
Aggregate Testing
Bricks, Blocks, Flags & Pavers
Concrete Testing
Fresh Concrete Testing
Hardened Concrete Testing
Masonry
Screed Testing
Terrazzo
Geomaterials
Concrete Petrography
Mundic Concrete
SEM and X-ray
Sulphate Attack
Metallurgy
Laboratory Services
Bolt Testing
Metallographic Analysis
Metals and Welding
On-site Material Identification
Scaffold Testing
Tensile Testing
UKAS Testing
Investigation & Inspection
Ground Penetrating Radar (GPR)
Ground Radar
GPR Principles
Building Investigation
Chimney Flue Location
Concrete Imaging
Concrete Slab Surveys
Ferroscan or GPR
Inspection
Abseil Inspection
Bedding Mortar
Bridge Inspection
Building Inspection
Cladding Inspection
Concrete Floors
Ferroscan Surveys
Fire Damaged Concrete
GFRC Inspection
HAC Concrete
NDT Weld Inspection
Paint Inspection
Precast Concrete Inspection
Woodwool
Leak Detection
Leak and Defect Location
Waterproof Membranes
Load Testing
Buildings
Balcony and Barrier Testing
Bridge Structures
Car Park Barriers
Crowd Barriers
Cladding Systems
Foundations
Glass Panels
Specialist Testing
EM Surveys
Datalogging
Slip Resistance
Thermography
Steelwork/Metallurgy
Steelwork Services
Site Sampling
Safe Working Loads
Steelwork Fire Damage
Consultancy
Building Envelope
Building Regulations
Condensation
Facades & Roofing
Our Track Record
Thermal Performance
Thermal Training
Thermography
U-Values and Bridging
Concrete
Alkali Aggregate Reactivity
Concrete Consultancy
Concrete Durability
Concrete Strength Assessment
Conservation
Ancient and Modern
Heritage
Historic Mortars
Expert Services
Expert Witness
Independent Advice
Geology/Geomaterials
Geomaterials Services
Coastal Engineering
Polymers
Polymer Consultancy
Odour Analysis
Polymers in Construction
Polymer Failure
Polymer Identification
Polymer Microscopy
Quality Assurance
Contract Administration
Materials and Workmanship
Specialist Services
Damage Assessment
Demolition and Refurbishment
Glass and Glazing
Steelwork
CE Marking
ISO 3834 Services
Metallurgical Failure
Steelwork Consultancy
Stone Consultancy
Building Stone (new projects)
Building Stone (existing structures)
Building Stone (suitability)
Sandberg Consultants