Schedule of Stone Tests
Petrographic Tests
- BS EN 12407 Petrographic Description
- BS EN 12326-2 Petrographic Examination (slate)
- BS 5930 Petrographic Description
- ISRM Petrographic Description
Physical Tests
- BS EN 1925 Water Absorption Coefficient by Capillarity
- BS EN 1936 Real Density & Total Porosity
Apparent Density & Open Porosity
- BS EN 13755 Water Absorption at Atmospheric Pressure
- ASTM C97 Water Absorption & Density
- BR 141 Porosity & Saturation Coefficient
- ISRM Water Content, Porosity & Absorption
- In-House Method Microporosity (water)
- In-House Method Thermal Expansion
- BS 6073 Moisture Expansion
Mechanical Tests
- BS EN 1926 Compressive Strength
- BS EN 12372 Flexural Strength Under Concentrated Load (3pt)
- BS EN 13161 Flexural Strength Under Constant Moment (4pt)
- ASTM C99 Modulus of Rupture (3pt)
- ASTM C170 Compressive Strength
- ASTM C880 Flexural Strength (4 pt)
- ISRM Uniaxial Compressive Strength
- In-House method Young’s Modulus
- In-House method Poisson’s Ratio
- ISRM Indirect Tensile Strength (Brazil Test)
- ISRM Fracture Toughness
- ISRM Concentrated Point Load Strength
- In-House method Tile Impact Strength
Durability Tests
- BS EN 12371 Frost resistance
- In-house Method Frost Resistance (BS EN 12371) - large elements
- DIN 52104 Frost Resistance
- CWCT Accelerated Aged Strength Test
- BS EN 12370 Salt Crystallisation
- BR 141 Salt Crystallisation
- BR 141 Acid Immersion
- ISRM Slake Durability
- In-House Method Thermal Shock
- In-House Method Fatigue (cyclical)
Miscellaneous Tests
- BS EN 14231 Slip Resistance
- BS EN 1341 Slip Resistance
- BS 7976 Slip Resistance
- BS EN 1341 Abrasion Resistance
- ASTM C241 Abrasion Resistance
- In-House Method Staining Potential
- ASTM D2203 Staining from Sealants
- In-House Method Crack Inspection
- In-House Method Dye Testing of Panels
Slate Tests
- BS 680 Water Absorption
- BS 680 Acid Immersion
- BS 680 Wetting & Drying
- BS EN 12326-2 Water Absorption
- BS EN 12326-2 Failure Load in Bending
- BS EN 12326-2 Freeze Thaw Resistance
- ASTM C120 Modulus of Rupture
- ASTM C121 Water Absorption
- ASTM C217 Weathering Resistance
Fixing Tests
- BS EN 13664 Breaking Load at Dowel Hole
- BS 5080 Pull-Out Strength
- In-House Method Undercut Anchors
- In-House Method Kerf Supports
- In-House Method Precast dowels
- BS 8200 Soft & Hard Body Impact
For further information contact: David Ellis, Partner
Direct Tel: 020 7565 7065
Email:
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
|