Odour Analysis

The most common reason for carrying out odour analysis is that an unpleasant odour has been reported. However, even when an odour is considered acceptable, unless the cause of an odour is understood, it is not possible to establish whether or not there are any significant implications.

If an odour is noticeable, it means that there is a detectable level of air-borne substance. This could be completely harmless, it could be toxic or it could be a sign of unacceptable material degradation.

Sometimes it may be possible to identify an odour from a site visit, or to establish what it is likely to be based on a review of the relevant material specifications. However, the only way to make a definite identification is to carry out a laboratory analysis. This can be done by analysis a material specimen or taking an air sample from the local environment.

The analysis of air samples can be also be used to investigate air-borne substances being given off polymer materials, often referred to as “off-gassing”. This can be useful in polymer conservation applications where artefacts are often stored in an enclosed or sealed environment, or in analysis of the cavity in a glazing unit to investigate degradation of sealants.

Marion Ingle

For further information contact: Marion Ingle, Senior Associate
Direct Tel: 020 7565 7063
Email: This email address is being protected from spambots. You need JavaScript enabled to view it.

About
Corporate Profile
Organisation
Quality of Service
People
Neil Sandberg
Steve Pringle
Simon Clarke
David Ellis
Philip Tate
Tony Willmott
Richard Rogerson
Mike Eden
Julian French
Chris Morgan
Gavin Mayers
Gregory Moor
Richard Harris
Jayne Fagan
Rom Gostomski
Bob Easthope
Ian Hudson
Julie Dell
Simon Morris
Marion Ingle
Mariachiara Faliva
Doug Hunt
Panos Sotiropoulos
Roger Lucas
Tony Pitman
Daniel Kinnersley
Michael Gould
Jim Carmichael
Andy Kitson
Yohann Guellil
Alexander Hollyman
Memberships and Associations
Contact us
Vacancies
Building Inspector
Structural Engineer
Construction Materials Engineer
Materials
Laboratories
Building Stone
Building Stone
CE Marking Stone
Stone Testing
UKAS Stone Testing
Chemistry
Cement Testing
Chemical Testing
Chloride Testing
Efflorescence
Hardened Concrete Analysis
Infrared Spectroscopy
Lead in Paint
Mortar Testing
Rock Salt Testing
Screed Analysis
Water Testing
Construction Materials
Agglomerated stone
Aggregate Testing
Bricks, Blocks, Flags & Pavers
Concrete Testing
Fresh Concrete Testing
Hardened Concrete Testing
Masonry
Screed Testing
Terrazzo
Geomaterials
Concrete Petrography
Mundic Concrete
SEM and X-ray
Sulphate Attack
Metallurgy
Laboratory Services
Bolt Testing
Metallographic Analysis
Metals and Welding
On-site Material Identification
Scaffold Testing
Tensile Testing
UKAS Testing
Investigation & Inspection
Ground Penetrating Radar (GPR)
Ground Radar
GPR Principles
Building Investigation
Chimney Flue Location
Concrete Imaging
Concrete Slab Surveys
Ferroscan or GPR
Inspection
Abseil Inspection
Bedding Mortar
Bridge Inspection
Building Inspection
Cladding Inspection
Concrete Floors
Ferroscan Surveys
Fire Damaged Concrete
GFRC Inspection
HAC Concrete
NDT Weld Inspection
Paint Inspection
Precast Concrete Inspection
Woodwool
Leak Detection
Leak and Defect Location
Waterproof Membranes
Load Testing
Buildings
Balcony and Barrier Testing
Bridge Structures
Car Park Barriers
Crowd Barriers
Cladding Systems
Foundations
Glass Panels
Specialist Testing
EM Surveys
Datalogging
Slip Resistance
Thermography
Steelwork/Metallurgy
Steelwork Services
Site Sampling
Safe Working Loads
Steelwork Fire Damage
Consultancy
Building Envelope
Building Fire Safety Audits
Building Regulations
Condensation
Facades & Roofing
Our Track Record
Thermal Performance
Thermal Training
Thermography
U-Values and Bridging
Concrete
Alkali Aggregate Reactivity
Concrete Consultancy
Concrete Durability
Concrete Strength Assessment
Conservation
Ancient and Modern
Heritage
Historic Mortars
Expert Services
Expert Witness
Independent Advice
Geology/Geomaterials
Geomaterials Services
Coastal Engineering
Polymers
Polymer Consultancy
Odour Analysis
Polymers in Construction
Polymer Failure
Polymer Identification
Polymer Microscopy
Quality Assurance
Contract Administration
Materials and Workmanship
Specialist Services
Damage Assessment
Demolition and Refurbishment
Glass and Glazing
Steelwork
CE Marking
ISO 3834 Services
Metallurgical Failure
Steelwork Consultancy
Stone Consultancy
Building Stone (new projects)
Building Stone (existing structures)
Building Stone (suitability)
Sandberg Consultants